|
zombielicious
    
location:
Montreal, Quebec
Gender: Female
 |  | Re: Malt Plant construction?
<Reply # 20 on 9/16/2005 1:38 AM >
|  | | | LMAOOOOO! my friend is in that movie!!! haha
|
|
ArmyMan
 
Gender: Male
When there no more room in hell , deads will walk the earth !
| | Re: Malt Plant construction?
<Reply # 21 on 9/16/2005 2:49 AM >
| | | | AHHHHHHHHHHHHHHHHHHHHh FUC***** . javais justement préparé un trip au malting plant vendredi , justtement pour aller le plus haut possible .. mais la , tout nos plant sont démoli et réduit en poussiere ... CALI* ....
des que les maudit tournage sont fini ,, faut trouver un moyen de re-monter la !!! ca fait trop chierrrrrrrrr
When there's no more room in hell , the dead will walk the earth ! |
|
nel58
  
location:
montreal (st-henri) Qc
Gender: Female
yep..something's under..let's check ! (RIP Joséphine ,april 1998-october 2010 )
| | Re: Malt Plant construction?
<Reply # 23 on 9/16/2005 3:39 AM >
| | | | On se calme ArmyMan, ne te décourage pas....La vie n'est pas finie !!!
On trouvera un moyen de remettre ça en "ordre",compte sur moi !Disons que pour l'instant les silos se reposent....
Mieux vaut un cinéMalt temporaire qu'un condoMal(t)définitif non?
|
|
nel58
location:
montreal (st-henri) Qc
Gender: Female
yep..something's under..let's check ! (RIP Joséphine ,april 1998-october 2010 )
| | Re: Malt Plant construction?
<Reply # 24 on 9/16/2005 4:43 AM >
| | | | Ce qui est aussi amusant c'est la sécurité ajoutée...à la base de certains "hoppers" il y a des balles de tennis pour arrondir les coins pointus!,
quelques rampes et balustrades pour ne pas tomber dans les ouvertures d'escaliers,quelques marches réparées,des plastiques recouvrants les trous et le sommet du Humphrey lift (moins d'eau = moins de dégât = longévité accrue )
Un plafond a même été recouvert d'un filet très discret pour empêcher la brique de tomber!
Mais il reste encore 99% de 'hardcore" tout de même...il y a de quoi garder sa vigilance..
Photos à venir
|
|
mewthree
location:
Montreal, Quebec, Canada
Gender: Male
| |  | Re: Malt Plant construction?
<Reply # 25 on 9/16/2005 2:21 PM >
| | | | i guess that now that the "makeshift ladder" is down... everyone will have to get up the old way.. before there was a makeshift ladder.
|
|
ArmyMan
Gender: Male
When there no more room in hell , deads will walk the earth !
| | Re: Malt Plant construction?
<Reply # 26 on 9/16/2005 3:39 PM >
| | | | yeah . but im sure the old way is the exterior ladder ?? 
je suis calme , la seul chose qui me fait chier cest que ca fait vraiment longtemp que jattendais de retourner au malt plant pour grimper toujour de plus en plus haut , et la japrend que la facon la moin extérieur de monter n'existe plus cets ca qui me rend triste !
une facon p-e plus "sécuritaire" de réinstaller les echelle serais de les "ti-rapper" a mort ... avec des bonne vielle ti-rap de 1/2 pouce !
j'y vais quand meme aujourdui , on va aller checker l'état de la situation , p-e quon va ramener des photo !!!
When there's no more room in hell , the dead will walk the earth ! |
|
TaP
location:
Montreal, QC
Gender: Male
| | Re: Malt Plant construction?
<Reply # 27 on 9/16/2005 7:50 PM >
| | | | je vais monter par les escaliers ou le truss et je vais le reparer, inquitez vous pas
|
|
nel58
location:
montreal (st-henri) Qc
Gender: Female
yep..something's under..let's check ! (RIP Joséphine ,april 1998-october 2010 )
| | Re: Malt Plant construction?
<Reply # 28 on 9/16/2005 8:12 PM >
| | | | Et je vais l'aider.. car nous formons une formidable équipe !
|
|
nel58
location:
montreal (st-henri) Qc
Gender: Female
yep..something's under..let's check ! (RIP Joséphine ,april 1998-october 2010 )
| | Re: Malt Plant construction?
<Reply # 29 on 9/16/2005 8:21 PM >
| | | | En fait, on a trouvé une façon de s'y rendre...mais c'est un peu/beaucoup/énormément "scary" et il faut en plus être très mince et un peu fou......mais c'est faisable (et réalisé par TaP)
On s'engage tout de même à éclairer la voie TaP et moi....
|
|
TaP
location:
Montreal, QC
Gender: Male
| | Re: Malt Plant construction?
<Reply # 30 on 9/16/2005 8:25 PM >
| | | | Posted by nel58
En fait, on a trouvé une façon de s'y rendre...mais c'est un peu/beaucoup/énormément "scary" et il faut en plus être très mince et un peu fou......mais c'est faisable (et réalisé par TaP)
On s'engage tout de même à éclairer la voie TaP et moi....
|
nel qui monte
mon pere ma donner un harnais de travail, je vais aller chercher de la mtn climbing rope et je vais arranger sa pour les personnes pas capable de passer par la, cette facon est bcp plus securitaire...le top ou on saccroche est un peu shakey mais cest mieux que le super escabo de la mort!!
[last edit 9/16/2005 8:29 PM by TaP - edited 1 times]
|
|
cjb
location:
Sept-îles/Saint-John's/Corner Brooks/Montréal/Sydney
Gender: Male
| | | Re: Malt Plant construction?
<Reply # 31 on 9/16/2005 10:19 PM >
| | | | nice ! I like hardcore stuff!
http://www.magazin...dossiers/index.htm |
|
TaP
location:
Montreal, QC
Gender: Male
| | Re: Malt Plant construction?
<Reply # 32 on 9/17/2005 2:30 AM >
| | | | Posted by cjb
nice ! I like hardcore stuff!
|
en plus que cest hardcore juste d'acceder a la chambre ou il a lescalier en spirale
|
|
mewthree
location:
Montreal, Quebec, Canada
Gender: Male
| | | Re: Malt Plant construction?
<Reply # 33 on 9/17/2005 8:58 PM >
| | | | the ladders are as easy to put back up as they are to take down. it would take 20 minutes max ( if you are taking your sweet ass time) to put them back up. tie wraps would work, but they are easy to cut off. to get up, a rope would be fine, or you could do what I did when the ladders were taken down the last time: climb up the spiral railing that goes up into the hole on the ceiling... or you can spend 2 minutes to climb the " X - frame " outside. The bad part about the X frame is that you are visible. I recommend a rope with a few knots in it, that way most people cant get in, or wouldn't bother to try it in case it isn't solid.
|
|
nel58
location:
montreal (st-henri) Qc
Gender: Female
yep..something's under..let's check ! (RIP Joséphine ,april 1998-october 2010 )
| | Re: Malt Plant construction?
<Reply # 34 on 9/17/2005 11:52 PM >
| | | | Don't worry our way is great and indoor.Forget the tie wraps,heavy duty hardware carabiners (you get it closed by turning the screw) should be better.
We will need a rope only in case...
But we have to wait 'till they're not shooting 'though...
The only bug is that big huge machinery vent that blocks the way to the ladders,on the catwalk.
|
|
TaP
location:
Montreal, QC
Gender: Male
| | Re: Malt Plant construction?
<Reply # 35 on 9/17/2005 11:58 PM >
| | | | the carabiners would be super expensive... but sure!, we just need to get big ones the opening might be a little too small to fit the ladders...
|
|
mewthree
location:
Montreal, Quebec, Canada
Gender: Male
| | | Re: Malt Plant construction?
<Reply # 36 on 9/18/2005 1:36 AM >
| | | | well can you find the ladders that got taken down? check to see if they were left close by (in case you haven't already). ALSO, isn't there an elevator shaft right next to that? I didn't check if it goes up to the proper level. You could easily climb inside it (in theory) but I never thought to examine it.
|
|
TaP
location:
Montreal, QC
Gender: Male
| | Re: Malt Plant construction?
<Reply # 37 on 9/18/2005 3:03 AM >
| | | | well technically you couls, but the way we figures out is wayy better, even if it gives you a "Torticoli"
|
|
zombielicious
location:
Montreal, Quebec
Gender: Female
| | Re: Malt Plant construction?
<Reply # 38 on 9/24/2005 4:20 PM >
| | | | yesterday i "went" and it was the last day of filming, was pretty cool
heres a funny pic of some of the actors
[last edit 9/24/2005 4:23 PM by zombielicious - edited 1 times]
|
|
teak_one
| | Re: Malt Plant construction?
<Reply # 39 on 10/15/2005 8:37 PM >
| | | | i was browsing audioterrorism the other day and found these pics, i think they're freaking awesome. did anyone get to witness this, or have any idea what they did to light up the old stinky?
thanks to lcedp for the pics
|
|
Powered by AvBoard AvBoard version 1.5 alpha
Page Generated In: 125 ms
|
|
Ethics
