|
|
|
UER Store
|
|
sweet UER decals:
|
|
|
|
Activity
|
|
907 online
Server Time:
2024-05-03 00:34:53
|
|
|
Olaf
Location: Wilmingon, NC Gender: Male
| | | Re: Grappling Hooks! <Reply # 100 on 11/4/2007 11:59 PM >
| | | I will attach some photos of hooks and similar wannabe devices later tonight but here is something I have found to be helpful when going up and in. Say for example you have a choice of going in either the second or third story window of a building and you want to use the second. What will make it much easier for you is throw and secure your hook/device to the THIRD story window. This way when you get to the second level you can continue climbing the rope so you are even with the window it's self and can much more easily climb in. As opposed to getting to the top of the window you threw it to, then have to get over your hook without dislodging it, losing your grip or tiring yourself out. You can (likely) get to the room your hook and rope is sticking out of through the buildings stairways. I do this whenever possible, get your hook on something higher than where you actually want to go (use some foresight about how/if you can retrieve your hook) and from there you can often just "step" in. There ARE some good grapples on the market but like all quality gear it isn't cheap. Personally as far as my safety goes I'll spend $500 on something if it means I can trust it. Now I am fortunate enough that I can make that sort of stuff myself but for those who can't. If you like them/use them there are grapples out there that are well worth the money. What is your life, and the success of your endeavor worth to you?
"I have come here to chew bubble gum and kick ass, and I'm all out of bubble gum" http://i22.photobu...er_zpsdbf6a059.gif |
|
Pravus
Location: Chicago Area Gender: Male
Now the two key words for tonight - "caution" and "flammable"...
| | | | Re: Grappling Hooks! <Reply # 102 on 11/6/2007 5:44 AM >
| | | I'd also put the TRG Grabber on that list of 'good' hooks.. http://www.trgear....hp/products_id/210
The rest of their hooks here, although some are meant for trip wires and the such not as lifelines... http://www.trgear....ult.php/cPath/1_49
Live to Serve, Serve to Live.. |
|
Olaf
Location: Wilmingon, NC Gender: Male
| | | Re: Grappling Hooks! <Reply # 103 on 11/6/2007 6:20 AM >
| | | I purposely left this one out due to it's poorly designed blades and choice of aluminum pins that anchor said blades. It looks nice but I have doubts of it's reliability.
"I have come here to chew bubble gum and kick ass, and I'm all out of bubble gum" http://i22.photobu...er_zpsdbf6a059.gif |
|
Pravus
Location: Chicago Area Gender: Male
Now the two key words for tonight - "caution" and "flammable"...
| | | | Re: Grappling Hooks! <Reply # 104 on 11/6/2007 9:28 AM >
| | | Posted by Olaf I purposely left this one out due to it's poorly designed blades and choice of aluminum pins that anchor said blades. It looks nice but I have doubts of it's reliability.
|
the specs of it on TRGs site say the pins are stainless steel, much of it is made of aluminum but thats really not too shady since aluminum is 'fairly' strong (much like the GHC which is also mainly made from aluminum) but anyway you look at it it's rated for 1650lbs which means it can likely take upward to 3,000lbs before it actually fails.. Which is complete overkill for any normal person (or small group of people).. But in any case it's /far/ better then the crap "ninja grappling hook" that you can find for $20 all over the net..
Live to Serve, Serve to Live.. |
|
Olaf
Location: Wilmingon, NC Gender: Male
| | | Re: Grappling Hooks! <Reply # 105 on 11/6/2007 5:47 PM >
| | | So true, it's a wonder anyone buys that shit.
"I have come here to chew bubble gum and kick ass, and I'm all out of bubble gum" http://i22.photobu...er_zpsdbf6a059.gif |
|
Tavv
Location: The Rocky Mountains Gender: Male
| | Re: Grappling Hooks! <Reply # 106 on 11/7/2007 9:01 PM >
| | | If you are creative, I'm sure that you could find a use for these. This is the Spectra Ice Piton by Black Diamond. Also for those of you interested in a lite, low profile and TRUSTWORTHY harness, check out the "alpine bod", also by Black Diamond. http://www.bdel.com/gear/spectre.php
|
|
Tavv
Location: The Rocky Mountains Gender: Male
| | Re: Grappling Hooks! <Reply # 107 on 11/12/2007 4:41 AM >
| | | If you are really serious about wanting a grappling hook, and you have adequate funds, you will really like this setup!
http://www.rigtech...l.aspx?intP_ID=792
|
|
denimdan
Location: south suburbs of chicago Gender: Male
munchies ... lol
| | | | Re: Grappling Hooks! <Reply # 108 on 12/27/2007 4:54 PM >
| | | I've been gone for way too long and I'm glad to be back. I strongly suggest to all of you, DON'T resist arrest by punching piggys in the face ... anyways. I'm surprised that there have been so many replies, pictures, links, suggestions, and input on this subject. ok ... my input and questions for different people. Cypre - ok dude, metallurgy takes patience and if you're using a propane torch throw it away. get the acetylene torch(its usually a yellow bottle) from the hardware store. if u have access to a cutting torch use that instead. put it in the vice(or whatever u have to secure it but i highly recommend the vice) and heat it until its orange hot(people always say red hot ... but its orange from what i can see). then, take a hammer and beat it to the bend u like. reheat and let cool. DO NOT cool it by putting it in water. heating it and bending it weakens it somewhat but rapidly cooling it is much worse. Blacklines - lol at the reply to Cypre A-BOMB - you said that you figured out some way to rig an electric motor to a crank. It would be much appreciated if you could show pics and possibly a video? Also, how in the name of hell did u manage to make a wing nut work with a cotter pin to lock it in place?? did u lock it as tight as it would go and then drill through the the wing nut and bolt? awesome input people! I shall post more things as soon as i get situated and have a shope set up again. keep on keeping on
Impossible is only impossible to those who can't see it being done |
|
A-BOMB
Location: Ambridge/Pittsburgh, PA Gender: Male
Lord of Dangerous Stuff
| | | Re: Grappling Hooks! <Reply # 109 on 1/23/2008 10:21 PM >
| | | Posted by denimdan A-BOMB - you said that you figured out some way to rig an electric motor to a crank. It would be much appreciated if you could show pics and possibly a video? Also, how in the name of hell did u manage to make a wing nut work with a cotter pin to lock it in place?? did u lock it as tight as it would go and then drill through the the wing nut and bolt? |
Its exactly like you though I tightened the nut down till it was solid then used chucked it up in my drill press and drilled a hole for the cotter pin. As for the person winch I used the motor and batteries from a 500watt electric scooter and rear wheel/chain. I removed the tire from the rim and milled some flats into the inner section of the rim to use it like a capstan, and I added a planetary gear set from burnt out 2000lb ATV winch to the motor to increase the gear ratio to about 576:1 it had wicked torque! I would just load the rope on like a normal capstan winch and attached it to my harness, I only ever tested it on a 50'ish retaining wall. It could get me to the top in about 40 seconds so about alittle more than one foot per second. Problem was it was bulky and heavy(too heavy and difficult to use on a single line) if I had someone to feed the drum and take the slack I could mount it on a tripod for lowering/accending, but before I can try it again I need to make a better gearbox and housing, and find a replacement for the lead acids.
|
|
Wood Post
Location: Blacksburg Gender: Male
| | Re: Grappling Hooks! <Reply # 110 on 1/24/2008 11:53 PM >
| | | Pravus, as for lowering yourself down, why not do what most rock climbers do? Find something sturdy and run the rope around it. Let both ends fall to the ground. Then use your figure wight or belay device and lower down. This way when you pull the rope back down you're getting much less wear on it. The only problem is that you can only abseil half your rope length.
I'm spinning counter-clockwise, each turn robs the planet of angular momentum, slowing its spin the tiniest bit, lengthening the night, pushing back the dawn, giving me a little more time here with you. |
|
Pravus
Location: Chicago Area Gender: Male
Now the two key words for tonight - "caution" and "flammable"...
| | | | Re: Grappling Hooks! <Reply # 111 on 2/8/2008 3:15 AM >
| | | Posted by Wood Post Pravus, as for lowering yourself down, why not do what most rock climbers do? Find something sturdy and run the rope around it. Let both ends fall to the ground. Then use your figure wight or belay device and lower down. This way when you pull the rope back down you're getting much less wear on it. The only problem is that you can only abseil half your rope length.
|
For the most part we normally find other ways around, but if tied right the highwayman's hitch is an excellent knot to save the rope on questionable surfaces..
Live to Serve, Serve to Live.. |
|
|
|
All content and images copyright © 2002-2024 UER.CA and respective creators. Graphical Design by Crossfire.
To contact webmaster, or click to email with problems or other questions about this site:
UER CONTACT
View Terms of Service |
View Privacy Policy |
Server colocation provided by Beanfield
This page was generated for you in 172 milliseconds. Since June 23, 2002, a total of 740254320 pages have been generated.
|
|