|
|
|
UER Store
|
|
sweet UER decals:
|
|
|
|
Activity
|
|
914 online
Server Time:
2024-05-06 01:13:57
|
|
|
Dressed in Black
Location: Vernon B.C. Gender: Male
| | Re: Motion Detectors!! <Reply # 60 on 2/1/2006 7:27 AM >
| | | Posted by Blue90 hahaha, nice. I still think you should go RE4 style on it and shoot or grenade it until satisfactory results appear.
|
Agreed. But only use the SOCOM if it has the silencer or else you'll alert the guards.
-DiB |
|
j0lt
Location: Kobe, Japan Gender: Male
| | | Re: Motion Detectors!! <Reply # 61 on 2/1/2006 11:51 AM >
| | | 1 - Don't break anything else! 2 - Check your corners carefully and when you encounter a motion sensor, keep a nice wide piece of masking tape (the kind contractors use - it won't damage anything that it's stuck to), and walk REAL SLOW up to the motion sensor (for inspiration, watch Sneakers), and VERY SLOWLY raise your arms up and cover the sensor with the tape. When you're ABSOLUTELY SURE it won't go off again, you can move freely through that area. Next time tho, if you can't get in without breaking something, find somewhere else to explore. It's not a hard thing to do.
j0lt: Larger than life and twice as ugly! |
|
maynardsouthern
Location: Knoxville TN Gender: Male
| | | | Re: Motion Detectors!! <Reply # 62 on 2/1/2006 8:27 PM >
| | | Posted by Mr. Fuzzy Instead of doing the quick run thing as suggested before try letting an animal out in the building every once in a while like a raccoon or squirrel every 4th day. They'll set the alarm off, and whoever comes finds it's just a raccoon or squirrel inside. It'll piss them off for sure every time ADDITION: Depending on the type of sensor and if animals can bug it, that is
|
Posted by MindHackerI like the animal+masking technique. Run in and cover the sensor, leaving an animal behind for a reason that it woulda gone off, so its not that suspicious.
|
Why involve innocent woodland creatures in your evil schemes?
|
|
desmet
When the going gets weird, the weird turn pro.
| | | | Re: Motion Detectors!! <Reply # 63 on 2/1/2006 9:01 PM >
| | | Posted by InsertNameHereI'm thinking that putting one of these in a hidden location in the same room as a PIR could effectively jam it. Initially turning it on would likely set the sensor off, but after that (security could just shrug it off anyway), would the flood of IR light cloak your IR signature? Or is it cumulative - your IR would just show up on top of the IR flood from this device? The pulsing of the IR light could also cause a problem, but perhaps it could be adjusted to a constant stream.
|
I would be interested (because I can't claim to know much about this stuff) why this would not work. You would definitely have to put the IR emitter in a location which would not be spotted, leave it on, and set the alarm off. Once the alarm was reset, it seems like the sensors would be blinded by the overwhelming amount of IR hitting them. The restriction would obviously be that you could not get between the emitter and the detector, but it seems like it would work to me. You would also need a pretty powerful IR source, but it seems like it would work. Practicality is completely another matter. I mean multiple sensors and all that would be tricky to deal with, but...it still sounds possible to me.
|
|
InsertNameHere
Location: North County San Diego Gender: Male
We were playing flashlight tag, officer!
| | | Re: Motion Detectors!! <Reply # 64 on 2/1/2006 10:52 PM >
| | | If I knew how to read schematics, I'd definitely build one to test on my own. I'm afraid that won't be happening, though.
A cage went in search of a bird. |
|
Blue90
Location: TN
Shiny.
| | Re: Motion Detectors!! <Reply # 65 on 2/2/2006 2:05 AM >
| | | Posted by desmet
You would definitely have to put the IR emitter in a location which would not be spotted, leave it on, and set the alarm off. Once the alarm was reset, it seems like the sensors would be blinded by the overwhelming amount of IR hitting them. The restriction would obviously be that you could not get between the emitter and the detector, but it seems like it would work to me. You would also need a pretty powerful IR source, but it seems like it would work.
|
Glotoob makes an IR Toob, that might work, but i don't know how powerful it is...
wait... how often is it that the motion detectors have the... whatever it is that makes it not register small animals? Because couldn't you design something that looks like a mouse or something that could be used to somehow deactivate it? Also, does strong magnetism hurt them? edit: added a lot [last edit 2/2/2006 2:16 AM by Blue90 - edited 1 times]
This is the way the world ends. |
|
statik
Location: colorado
There has got to be more to life than just being really, really, really, ridiculously good-looking.
| | | Re: Motion Detectors!! <Reply # 66 on 2/2/2006 8:59 AM >
| | | Posted by FoxTwoFoxTwo Bases = plural form of basis.
|
Resident Word Nazi lesson #66181-2a: If there is more than one basis, only one can be considered 'regular.' All other bases should then be viewed as non-standard or unique. Therefore the term "regular bases", while grammatically correct, is not so logically. Now then, moving on... Small animal idea is a good one. But cooperative racoons are relatively hard to acquire. A fire extinguisher will not mask enough IR radiation to be effective. And tinfoil? There's 1,001 reasons why that won't work. There's still no consistent way to beat indoor PIR; nothing mentioned here, at least.
None more black.. |
|
j0lt
Location: Kobe, Japan Gender: Male
| | | Re: Motion Detectors!! <Reply # 67 on 2/2/2006 11:15 AM >
| | | Posted by statik There's 1,001 reasons why that won't work.
|
We're waiting...
j0lt: Larger than life and twice as ugly! |
|
FoxTwoFoxTwo
Location: Clarksville, Tennessee Gender: Male
I'm an explorer who photographs...
| | | Re: Motion Detectors!! <Reply # 68 on 2/2/2006 10:49 PM >
| | | I guess now that I think of it, the tinfoil would only work on a radar type detector (of which I think there are none) But look here because I was wondering if there was an IR absorbing material and I found that. Now, if ther were such a material that absorbed IR rather than reflect it, one could possibly create a shield of it to suck up the active IR detectors and trick the PIR detectors...
Wishful thinking I suppose. But a man can dream.
Bringing exploration to Clarksville. Journal: http://www.uer.ca/...id=4&catid=2000173 | RUAUER!?!?!?111ONE??QUESTIONMARK | FoxTwoFoxTwo - "I just ordered a large. I have a relatively huge head so yeah..." |
|
Chiburashka
Location: Ontario, Thornhill Gender: Male
| | Re: Motion Detectors!! <Reply # 69 on 3/18/2006 11:33 PM >
| | | Posted by Team Leader Good advice, I thought about going under a sensor and spraying paint on it, theres lots of references to use of spray paint. Will it set off an active sensor? assuming you can get close enough to it. One thing i know for sure if you cut the wire it will set off a trouble alarm.
|
I'm currently in a scenario where I'm in a good position to sneak up on the sensor. It's a warehouse and I can get in from the second floor windows which would position me directly on top of the motion sensor and I was considering the spray paint theory but I'm not exactly sure it would work. If not spray painting it, how else can I deactivate it without setting off the alarm assuming the sensor is within reach. My only problem is I can't get down to the ground without the sensor activating the alarm. Has anyone tried the spray paint theory?
|
|
Raticus Moderator
Location: Tyler Gender: Male
Ratus exploricus abandonae
| | Re: Motion Detectors!! <Reply # 70 on 3/19/2006 2:11 AM >
| | | Posted by Mr Cupcakes you guys are all looking at it the wrong way. the best way to do it, according to my friend who actually installs alarm systems and fixes them, including Motion Sensors, would be to get to the alarm control panel, slice litte sections of the jacket off the wires running to the motion detector, than simply get some alligator clips and jump it across the wires. Than cut the wires past the alligator clips so the motion detector is no longer active, against UE ethics, but is probbably the best and easiest way to get it done.
|
definitely against UE ethics, and so is breaking a window. Like someone has said in here already, if you gotta go to that much trouble it's probably not worth it. But breaking in? Cutting wires? Not if your exploring with me.
Wise men speak because they have something to say; Fools speak because they have to say something. |
|
MindHacker
Location: Suburbs of DC Gender: Male
If you spot a terrorist arrow, pin it to the wall with your shoulder.
| | Re: Motion Detectors!! <Reply # 71 on 3/19/2006 5:26 AM >
| | | You have to cover it and bail. Your almost deff gonna trigger it, but if it doesn't look too abnormal (think covering the same size as the lense) then it won't be noticed. Return the next day / later that night, explore, and then uncover and bail. Fin.
"That's just my opinion. I would, however, advocate for explosive breaching, since speed and looking cool are both concerns in my job."-Wilkinshire |
|
blackhawk This member has been banned. See the banlist for more information.
Location: Mission Control
UER newbie
| | | Re: Motion Detectors!! <Reply # 72 on 3/19/2006 11:28 PM >
| | | Posted by Raticus
definitely against UE ethics, and so is breaking a window. Like someone has said in here already, if you gotta go to that much trouble it's probably not worth it. But breaking in? Cutting wires? Not if your exploring with me.
|
Yeap. Plenty of places with no alarms, that won't get you a permanent record, and have great scenes to take pics of. When you compromise a site's security you leave vulnerable to further damage like arson. It draws unwanted attention to any website that displays those pics of that site.
Just when I thought I was out... they pulled me back in. |
|
blackhawk This member has been banned. See the banlist for more information.
Location: Mission Control
UER newbie
| | | Re: Motion Detectors!! <Reply # 73 on 3/19/2006 11:40 PM >
| | | Posted by FoxTwoFoxTwo I guess now that I think of it, the tinfoil would only work on a radar type detector (of which I think there are none) But look here because I was wondering if there was an IR absorbing material and I found that. Now, if ther were such a material that absorbed IR rather than reflect it, one could possibly create a shield of it to suck up the active IR detectors and trick the PIR detectors...
Wishful thinking I suppose. But a man can dream.
|
There are active radar intrusion sensors in commercial as well as military use. Aluminum foil will probably trip them. Your "reward" will most likely be an armed guard. I know of a site using these and more.
Just when I thought I was out... they pulled me back in. |
|
Deuterium
Location: PNW Gender: Male
| | Re: Motion Detectors!! <Reply # 74 on 3/20/2006 12:50 PM >
| | | http://www.hubbell...02000%20CUI8001500(DT)Cutsheet.pdf They have something like that in some bathrooms on my campus. Dual technology using infrared and ultrasound. The delay and sensitivity is adjustable. I say find a not so busy bathroom with such device installed and set the delay to 30 seconds or so and practice until you can move around in the bathroom without causing the lights to come on.
|
|
basilthebatlord
Location: Ann Arbor, Michigan Gender: Male
The Mattel and Mars Bar Quick Energy Chocobot Hour
| | | Re: Motion Detectors!! <Reply # 75 on 3/21/2006 12:35 AM >
| | | Posted by Deuterium I say find a not so busy bathroom with such device installed and set the delay to 30 seconds or so and practice until you can move around in the bathroom without causing the lights to come on.
|
yes that sounds like a good idea. my friend has a motion triggered light on the exterior of his house, and trying to sneak by that is fun. however, this is a dubious practice because the delay on motion detectors used for security cannot be adjusted to be large enough.
Vote Democratic, it's easier than getting a job. |
|
Geo
| | Re: Motion Detectors!! <Reply # 76 on 3/26/2006 10:11 PM >
| | | gotta just whip my two cents in here...having some experience with installing alarms this is what i know of the area. First thing, if the place is alarmed, its probably somewhat occupied, that being said i personally am not going to bother. I've been UEing since before...well cant remember...not gonna date myself.. and the whole appeal in it is going where there is noone else and the legal ramifications are nil. But, knowledge is power, and who am i to judge someone who chooses to "cut wires", "defeat detectors", etc. with the knowledge they posess. Ok off the soapbox now.Re:wire splicing(doesnt apply to motion sensors as their EOL is usually internal) - Any panel i have werked with employs what is known as an E.O.L. resistor(some cheaper panels dont employ them),most were 2.2k. their purpose is to detect any wire bypassing. now these are only as good as the individual who installed them. if they are installed at the panel itself(lazy installer)then you can splice anywhere on the run. if they are installed at the outside of the switch you will see them if you can obtain a visual of the switch, this means any splicing done "downstream" of the EOL resistor will cause an alarm condition( better installer) in all my installs i ususally pop the bottom off the switch and install the EOL resistor in the switch itself(anally retentive installer)the purpose is to not let on that the panel employs this method, tempting a neophyte to splice in and cause an alarm condition. Ok..thats what i got on wire splicing. now, motion sensors that i have installed work on the principle of "zone" comparison. The lens(whitish clear cover over sensor) is divided into vertical zones, better sensors use more zones and the option of "lensing" out pets. the sensors compare the overall kelvin temp of each zone to itself and the one next to it, establishing motion detection. ie one zone goes "cold" and the next zone goes "hot" motion must have occured. The "pet" option is a different lens the installer places into the sensor which blocks out the lower portion of the sensors detection area. As far as i know ultrasonics were phased out years ago due to many false alarms(strong heat vents set them off). i myself have never used a sensor that had "radar" in it so i cant comment on that area. most of the units i installed had an EOL resistor in it and a cover tamper that was wired into a panic zone in the control panel. ie; always armed. But i do remember walking in front of sensors holding a piece of cardboard inbetween me and the sensor and getting right by. now perhaps this is only applicable to certain makers or types, or perhaps some other method of comparison is made rendering that method unusable now. at any rate hope some of this is enlightening for some, and if anything here is grossly erroneous please enlighten me.
|
|
Deuterium
Location: PNW Gender: Male
| | Re: Motion Detectors!! <Reply # 77 on 3/27/2006 8:21 AM >
| | | Posted by basilthebatlord
yes that sounds like a good idea. my friend has a motion triggered light on the exterior of his house, and trying to sneak by that is fun. however, this is a dubious practice because the delay on motion detectors used for security cannot be adjusted to be large enough.
|
The light triggered one maybe circumvented, but the infrared/ultrasound combo units are hard to beat.
|
|
SeeThirty
Location: Indialantic, Florida Gender: Male
| | | | | Re: Motion Detectors!! <Reply # 78 on 4/3/2006 3:04 PM >
| | | Ok...silly motion detector defeating method number 2billion... What about a means of "equalizing" the room's ambient readings? What I'm talking about would be similar to "white noise". Something to flood the room with IR emissions, in such a way that everything in the sensor's FOV would register the same reading. This is dodgy, I know. Maybe something set to trigger just before the system's sensors come online? That way you could get in there beforehand, set your blinding unit, and the room will have a new "ambient" so the sensors won't detect a change. If this could indeed work, the main drawback is you'd need to invest alot of time and money into the technique. It'd work better for a building with occupants, as you can always come in during "business hours" and place your device somewhere unobtrusive. Plus it'd be difficult to get your hands on an IR source that could effectively flood a whole room, and even then you'd have to consider multiple-sensor security units. I still think the only viable way to defeat an alarm system is to bypass it, rather than to mess with it's ever-upgrading series of customized sensors and buzzers. Other than that, don't go into a place with a sophisticated alarm system. The only system I've ever dealt with was so outdated (owner was a cheapskate) that the window vibration sensor didn't even work at all. Of course, since the owner was so cheap, the place was an empty storage building with nothing worth seeing. But that's just an example. Keep in mind, some people are butt stupid, and think that "any" alarm system will be enough. This guy's alarm system was audible only, no call-in to a monitoring company or 911. There are some people who even install nonfunctioning dummy cameras and generic alarm stickers on their windows to try and scare off intruders. But I'd say a good 80% of the time an alarm sign means there's a functional system inside. Generally I avoid a location if it seems to be protected by a good alarm system. If you familiarize yourself with basic security plans for businesses and warehouses, you can spot signs that a property has patrols or video surveillance very easily. Alarms are not always easy to detect from outside, especially in the dark. Scout your location when the lighting is good (daytime).
12/17/2007 (somewhere in AvChat) [10:29:47] <Lexi> Personally I don't really like her music [10:29:50] <Lexi> But goddamn [10:29:59] <Lexi> I'd lick her dry. |
|
fraxFF
Location: Rochester, NY Gender: Male
| | | Re: Motion Detectors!! <Reply # 79 on 4/8/2006 9:01 AM >
| | | trigger the alarm and then leave. Do this at different times for a few weeks. The idea is to cause enough false alarms so that the police stop responding or the alarm gets disabled. Just don't be predicable, someone might wait for you.
#!/bin/perl-sp0777i<X+d*lMLa^*lN%0]dsXx++lMlN/dsM0<j]dsj $/=unpack('H*',$_);$_=`echo16dio\U$k"SK$/SM$n\EsN0p[lN*1 lK[d2%Sa2/d0$^Ixp"|dc`;s/\W//g;$_=pack('H*',/((..)*)$/) |
|
|
|
All content and images copyright © 2002-2024 UER.CA and respective creators. Graphical Design by Crossfire.
To contact webmaster, or click to email with problems or other questions about this site:
UER CONTACT
View Terms of Service |
View Privacy Policy |
Server colocation provided by Beanfield
This page was generated for you in 141 milliseconds. Since June 23, 2002, a total of 740735365 pages have been generated.
|
|