Posted by The Bean |
8/20/2005 4:50 AM | remove |
aw man :( I was hoping they'd salvage that.
|
|
Posted by TurboZutek |
9/20/2005 1:42 AM | remove |
Good find!!
The only parts of an X-Ray machine that remains radioactive after use is the waveguide and strike plate.
Both are normally removed when the unit is decomissioned.
|
|
Posted by Barry Kooda |
10/5/2005 3:41 AM | remove |
What a waste of good stuff.
|
|
Posted by The Bean |
10/12/2005 9:15 AM | remove |
It didn't appear to be disassembled in ANY way when we were inside, so I suspect those parts were still inside (we'd been inside a week before it was torn down). The entire place looked like it'd just been forgotten about, there was still even a drum of film processing chemicals in the place.
|
|
Posted by jjcoolj |
6/29/2006 9:17 PM | remove |
Where does the radiation come from, turbo? I thought X-ray tubes are usually an electron emitter and a dense metal target, such as tungsten.
|
|
Posted by TurboZutek |
7/7/2006 11:46 PM | remove |
That's pretty much exactly it matey.
http://health.howstuffworks.com/x-ray2.htm
In UK X-Ray terminology, the 'Anode' is often called the 'strike plate' - as the Electron Beam 'Strikes' it before emitting X-Rays.
The part labeled 'Filter' here is the WaveGuide (although waveguide can ALSO be a horn shaped device put on front to widen / narrow the beam).
As I say, these parts are almost always removed - effectively disabling the machine. They get a little 'hot' over use too - and so pose a slight hazard at the end of their service lives.
|