|
I am having problems with a saber. I can recieve but everytime I transmit it just holds a constant tone when I try to transmit.
"If the threat level goes up its probably because of me." "I am looking for a girl who enjoys headbutting beltbuckles" |
|
I've passed the message on to a Motorola Lab Technician I know...I'll let you know what he says..
-Mike
Unit calling radio say again? |
|
Below is the reply from my tech...
A RAT tone is a button you push on the side of the radio which sends either a SingleTone or a series of DTMF tones which will open up the channel. The MDC is a form of ANI which could be set wrong (check the MDC Pre-Time, and make sure it's set to something small like 50msec or some such)..
If you want... e-mail me a copy of the codeplug from the radio and I'll take a look at it.. (mike@warpzone.ca)
Thanks!
-Mike
-----------
From: r0f
To: ExKa|iBuR
Posted: Fri Jan 16, 2004 5:39 am
Subject: Re: saber problem...
Sorry, am not familiar with that problem.
Try checking for RAT (Repeater Access Tones) or MDC signalling which may be programmed incorrectly. A tone to me, could mean something very different to someone else who has no clue.
S
Unit calling radio say again? |
|
Thanks for the heads up I will do that as soon as I get my 386 and such in.
"If the threat level goes up its probably because of me." "I am looking for a girl who enjoys headbutting beltbuckles" |
|
Sounds Familiar, however, my Saber has a couple channels that are programmed only on the receive side with transmit locked out. Could that be it?
Jake
|
Ethics
