|
|
build a simple but awesome BONG, from cheap materials bought from the "Home Depot" or an other building center's PLUMBING section. * {'}means foot, {"} means inches *what materials you need to buy: - 3' length of 2" ABS pipe.(main body of the bong) - 1- 2" ABS cap(bottom of the bong) - 1 12"x3/8" rigid supply line-(tube) water line- for a sink - 1 1/2" x 3/8" threaded chrome adapter(use as a bowl) - small can of ABS glue - hot glue stick - 3/8' drill bit *what tools you need: - a drill, or something that can make 2- 3/8" holes - pliers or wrench - hack saw or - wood saw -hot glue gun or fire to soften the glue stick *what to do: #1- cut 1' off the 3' section of 2" ABS pipe, so you have a 2' length of pipe. discard the 1' left over section. #2- Glue on the 2" ABS cap, to one end of the 2' section of pipe- which is now the bottom of your bong. #3- measure 12" from the bottom of your bong, and drill a 3/8" hole at a sharp angle towards the bottom of the bong. #4- ream out the hole out so the drill bit fits loosely in the hole. #5- drill one more hole 16" from the bottom, just above the first hole- to make a "choke" #6- using the nut supplied with the 1/2"x3/8" adapter, insert the 3/8" tube into the adapter and tighten the nut with pliers or wrench. #7- insert the 12" tube(with the adapter end up) into the hole, leaving 2" of chrome pipe exposed #8- use hot glue to seal around the 3/8" hole and the 3/8" tube for an air tight seal. #9- fill with 10" of water, insert a screen into the bowl and fill with your favourite tobacco product and enjoy! decorate your bong with cool stickers.
[last edit 4/30/2011 6:44 AM by logtec - edited 1 times]
They say "you can't judge a book by its cover!" I say "YES you can, if the cover has a girl on it with a cock in her mouth, its PORN!" if she's 18 and the cock is black, its GREAT porn! |
Add a poll to this thread This thread is one of your Favourites. Click to make normal.Click to make this thread a Favourite.
This thread is in a public category, and can't be made private. |
Powered by AvBoard AvBoard version 1.5 alpha
Page Generated In: 46 ms
|
|